全民彩票网

开泰主营:杭州铝合金锯片 | 杭州金属锯片 | 杭州板式锯片 | 杭州多片锯 | 各种非标锯片定做

新闻资讯

推荐产品

新闻资讯

当前位置: 网站首页 > 新闻资讯
  • 使用切铁切铝锯片要注意哪些方面?
  • 本站编辑:杭州开泰锯业有限公司发布日期:2018-07-25 11:21 浏览次数:

切铁切铝锯片使用要求:
Requirements for the use of iron cutting and cutting aluminum saw blades:
1、工作时,工件应确保被固定,型材定位符合吃刀方向,以免造成异常切入,不要施加侧压力或曲线切割,进刀要平稳,避免刀刃冲击性接触工件,从而导致锯片破损、或工件飞出,发生意外事故。
1, the work work, the workpiece should be ensured to be fixed, the profile positioning conforms to the direction of the knife, so as not to cause abnormal entry, do not apply side pressure or curve cutting, keep the knife smoothly, avoid the impact contact of the blade, and cause the saw blade breakage, or the workpiece flying out, accident accident.
2、在开始切削及停止切削时,不要进刀太快,避免造成断齿及破损。
2. When starting and stopping cutting, do not feed too fast to avoid causing broken teeth and damage.
3、工作时,发现声音和振动异常、切割面粗糙、或产生异味时,必须立即终止作业,及时检查,排除故障以免发生意外事故。
3. When working, when it is found that the sound and vibration are abnormal, the cutting surface is rough, or the odor is produced, it is necessary to terminate the operation imtely, check in time, and eliminate the faults in order to avoid accidents.
4、如果切割铝合金或其他金属,要使用专用的冷却润滑液,以防锯片过热,产生糊齿,和其他损坏,影响切割质量。
4. If the aluminum alloy or other metals are cut, special cooling lubricants should be used in order to prevent the overheating of the saw blade, produce paste teeth, and other damage, and affect the cutting quality.
5、干切时,请不要长时间连续切割,以免影响锯片的使用寿命和切割效果;湿片切割,应加水切割,谨防漏电。
5. When dry cutting, do not cut continuously for a long time, so as not to affect the service life and cutting effect of the saw blade; Wet blade cutting, should be cut with water, to prevent leakage of electricity.
6、设备排屑槽和吸渣装置确保畅通,以防积渣成块,影响生产和安全。
6, equipment chip removal slot and slag suction device to ensure smooth, to prevent accumulation of slag into blocks, affecting production and safety.

友情链接:秒速时时彩官网  秒速时时彩  秒速时时彩官网  秒速赛车  秒速时时彩  秒速赛车  秒速时时彩官网  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!